![Wind Turbine Anti-Freezing System](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647791089657-UZ5SDEI70SLU8698HHCU/Wind+Turbine.jpg)
Wind Turbine Anti-Freezing System
Finite Difference Approximations used to numerically solve for the temperature distribution in a representative section of composite laminate for wind turbine blades in freezing temperatures.
![Numerical Based Stress Analysis on Boeing 777 Aircraft Wing](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647792369621-LAWZKKLRIE33GDD8S8BQ/Boeing+777+Picture.jpg)
Numerical Based Stress Analysis on Boeing 777 Aircraft Wing
A numerical solution to the beam bending problem is pursued using Finite Difference approximations. A model is created to solve for the deflection of a cantilever beam and modified to solve for the deflection and stress within a Boeing 777 aircraft wing.
![Finite Element Modeling of Transverse Beam Vibrations with Elastic Boundary Conditions](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647793480895-US13OYIL2B5HHTZOVALH/Beam.jpg)
Finite Element Modeling of Transverse Beam Vibrations with Elastic Boundary Conditions
A study on transverse beam vibrations using Finite Element Analysis in MATLAB. Natural frequencies and mode shapes for a pinned-pinned and cantilever beam are identified under elastic boundary conditions.
![Design of a Carbon Dioxide Scrubbing System](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647793824161-QAR31TMM270LW3QY572F/Smoke+Stack.jpg)
Design of a Carbon Dioxide Scrubbing System
Finite difference methods used to approximate mass and energy flow for a carbon dioxide scrubbing system. Studies performed on the concentration of scrubbing agent in exhaust gas vs amount of carbon dioxide removed.
![Design of Cam Profiles using MATLAB](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647804978156-QGFK5RE25GCM71IK9LCW/Cam+Picture.png)
Design of Cam Profiles using MATLAB
Design of double dwell cam profiles for a gripper arm system using a self-created MATLAB App. Uses numerical methods and Sine Constant Cosine Acceleration (SCCA) curves to generate profiles for any given double dwell profile.
![Design of a Concentrated Solar Power Collection System](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647804309544-SGRM5VK7BJK61QZYI2K5/Solar+Power+Tower.jpg)
Design of a Concentrated Solar Power Collection System
Numerical methods used to model the energy transfer from a solar power collection system to heat a pipe of water.
![Design of a Liquid Cooling System for a Battery Bank](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647807567760-I9BSNWQJLVM6EVWEXRN0/Battery+Cooling+System.png)
Design of a Liquid Cooling System for a Battery Bank
Design of a liquid cooling system for a battery bank using numerical methods to model rates of heat transfer.
![M-C-K System Modeling and Modal Decomposition](https://images.squarespace-cdn.com/content/v1/62336119d073074717aae04b/1647807730384-KAJ75EV8CMWH9TOCP2N6/MCK.png)
M-C-K System Modeling and Modal Decomposition
Analysis on the dynamics of a mass-spring-damper system.